Terminal Units
Showing 1–15 of 16 results
-
Coils, Terminal Units, Ventilation
HeatCraft Condenser, Evaporator, MicroChannel, Steam and Hydronic Coils
Coils for commercial and industrial use. Custom fabrication, Modu-Coil and rush delivery available.
Condenser Coils
Energy Recovery Systems
Evaporator Coils
MicroChannel Coils
Steam Coils
Water/Fluid CoilsSKU: n/a -
PTAC and PTHP, Terminal Units, Ventilation
Islandaire
PTAC’S & PTHP for new construction and replacement projects. Islandaire produces a full replacement line for several models made by Singer, Amana, GE, Friedrich, Slant Fin, Ice Cap, Ice Air, and much more!
7,000 – 15,000 BTU
Electric Heat and Heat pump
Custom sizes
All accessories availableSKU: n/a -
Terminal Units, Unit Heaters, Ventilation
Rinnai Residential Hot air Generator
Available from our authorized wholesalers
Direct vent wall heating to heat an entire residence or to complete an existing heating system
Unique modulation technology optimizes energy efficiency and responds to the slightest change in temperature
Capacity ranging from 3,000 BTUs to 36,500 BTUs depending on the model
CSA certified
Direct evacuation wall simple to install and discreet
Very low sound levels and simple and intuitive control
Designed for connection to natural gas or propane gasSKU: n/a -
Terminal Units, Unit Heaters, Ventilation
Sterling Gas-Fired
Nexus Series
Performance effciencies of 96%
Single-stage, two-stage or full modulation firing rate across 2 sizes
Natural gas and LP gas for application flexibilityGG Series
Low-profile
Garage unit
Residential and commercial outbuilding certified (non-occupied spaces only) in seven configurations to suit every areaTF and TC Series
Tubular heat exchanger technologies
“In-shot” burner system for superior durability, reliability and performance
Available in both propeller (TF) and blower (TC) configurations
10-year heat exchanger warranty.Shield GF Series
Use in moisture-corrosive environments
Corrosion-resistant stainless steel exchanger and cabinet.SF and SC Series
Using a separate combustion process
Range of sizes in both propeller (SF) and blower (SC) configurations
Built to perform and protect in particle-corrosive environments amid excess dust, dirt and humiditySKU: n/a -
Terminal Units, Unit Heaters, Ventilation
Sterling Hot Water or Steam
HS Series
Copper coils with aluminum fins and totally enclosed motors in both serpentine (for low clearance areas) and header types for central boiler system applications.VS Series
Designed for installations that require down flow air delivery
Available in 15 sizes including low output (increased airflow) for high-ceiling applicationsSKU: n/a -
Chilled Beams, Terminal Units, Ventilation
Trox Active Chilled Beam
DID620 series beams are a low profile beam designed to allow integration into standard 24 inch wide ceiling grids.
DID600 series beams are also designed to allow their integration into standard 24 inch wide acoustical ceiling grids.
DID604 series beams are designed for four-way discharge patterns which may be suitable for location certain room sizes.
DID300 series beams have a nominal face width of 12 inches and utilize two vertical chilled water coils.
DID-E series beams are designed for high sidewall mounting in hotels and other domiciliary applications.
BID series beams condition perimeter areas in UFAD applications. Conditioned air is delivered by a dedicated perimeter area air handling unit.
QLCI series beams are integrated into low sidewall mounted cabinets and to discharge conditioned air to the space in a displacement fashion.SKU: n/a -
Airflow Control, Terminal Units, Ventilation
Trox EASYLAB and LABCONTROL
Precise air flow control for lab and healtcare application
Pressure independant damper style valve
Precise integrated room airflow and pressurization control
Selective diversity control
Simple commissioning and maintenance
Entire Stainless steel and entire plastic construction available
Integrated supply air VAV box and silencer available
Precise damper position”750 MBTU to 4000 MBTU
Fast action actuator
Low pressure drop and low operating pressure required
Vertical and horizontal installation
On site flow adjustment availableSKU: n/a -
Chilled Beams, Terminal Units, Ventilation
Trox Passive Beam
Type TPB
Available in nominal lengths of up to 10 ft with a horizontal 2-pipe heat exchanger
It can be installed either freely suspended or above the ceiling gridType PKV
Passive chilled beam with 2-pipe heat exchanger for ceiling installation, either freely suspended or above an open cell ceilingSKU: n/a -
Airflow Control, Terminal Units, Ventilation
Trox VAV Terminal Units
Type LVC
Circular VAV terminal units for supply air and extract air systems with variable volume flows, low airflow velocities and low duct pressuresType TVR
Circular VAV terminal units for standard applications regarding the supply air or extract air control in variable air volume systemsSKU: n/a -
Airflow Control, Terminal Units, Ventilation
Trox Volume Flow Controllers
Type VFL
Circular, mechanical self-powered controllers for insertion into ducting, for the quick and easy balancing of constant volume flow rates in ventilation and air conditioning systemsType RN
Circular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systemsType EN
Rectangular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systemsType AK
Circular shut-off dampers for shutting off volume flows in ventilation ducts of air conditioning systemsType VFC
Circular mechanical self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems with low airflow velocitiesSKU: n/a
-
Coils, Terminal Units, Ventilation
HeatCraft Condenser, Evaporator, MicroChannel, Steam and Hydronic Coils
Coils for commercial and industrial use. Custom fabrication, Modu-Coil and rush delivery available.
Condenser Coils
Energy Recovery Systems
Evaporator Coils
MicroChannel Coils
Steam Coils
Water/Fluid Coils -
PTAC and PTHP, Terminal Units, Ventilation
Islandaire
PTAC’S & PTHP for new construction and replacement projects. Islandaire produces a full replacement line for several models made by Singer, Amana, GE, Friedrich, Slant Fin, Ice Cap, Ice Air, and much more!
7,000 – 15,000 BTU
Electric Heat and Heat pump
Custom sizes
All accessories available -
Terminal Units, Unit Heaters, Ventilation
Rinnai Residential Hot air Generator
Available from our authorized wholesalers
Direct vent wall heating to heat an entire residence or to complete an existing heating system
Unique modulation technology optimizes energy efficiency and responds to the slightest change in temperature
Capacity ranging from 3,000 BTUs to 36,500 BTUs depending on the model
CSA certified
Direct evacuation wall simple to install and discreet
Very low sound levels and simple and intuitive control
Designed for connection to natural gas or propane gas -
Terminal Units, Unit Heaters, Ventilation
Sterling Gas-Fired
Nexus Series
Performance effciencies of 96%
Single-stage, two-stage or full modulation firing rate across 2 sizes
Natural gas and LP gas for application flexibilityGG Series
Low-profile
Garage unit
Residential and commercial outbuilding certified (non-occupied spaces only) in seven configurations to suit every areaTF and TC Series
Tubular heat exchanger technologies
“In-shot” burner system for superior durability, reliability and performance
Available in both propeller (TF) and blower (TC) configurations
10-year heat exchanger warranty.Shield GF Series
Use in moisture-corrosive environments
Corrosion-resistant stainless steel exchanger and cabinet.SF and SC Series
Using a separate combustion process
Range of sizes in both propeller (SF) and blower (SC) configurations
Built to perform and protect in particle-corrosive environments amid excess dust, dirt and humidity -
Terminal Units, Unit Heaters, Ventilation
Sterling Hot Water or Steam
HS Series
Copper coils with aluminum fins and totally enclosed motors in both serpentine (for low clearance areas) and header types for central boiler system applications.VS Series
Designed for installations that require down flow air delivery
Available in 15 sizes including low output (increased airflow) for high-ceiling applications -
Chilled Beams, Terminal Units, Ventilation
Trox Active Chilled Beam
DID620 series beams are a low profile beam designed to allow integration into standard 24 inch wide ceiling grids.
DID600 series beams are also designed to allow their integration into standard 24 inch wide acoustical ceiling grids.
DID604 series beams are designed for four-way discharge patterns which may be suitable for location certain room sizes.
DID300 series beams have a nominal face width of 12 inches and utilize two vertical chilled water coils.
DID-E series beams are designed for high sidewall mounting in hotels and other domiciliary applications.
BID series beams condition perimeter areas in UFAD applications. Conditioned air is delivered by a dedicated perimeter area air handling unit.
QLCI series beams are integrated into low sidewall mounted cabinets and to discharge conditioned air to the space in a displacement fashion. -
Airflow Control, Terminal Units, Ventilation
Trox EASYLAB and LABCONTROL
Precise air flow control for lab and healtcare application
Pressure independant damper style valve
Precise integrated room airflow and pressurization control
Selective diversity control
Simple commissioning and maintenance
Entire Stainless steel and entire plastic construction available
Integrated supply air VAV box and silencer available
Precise damper position”750 MBTU to 4000 MBTU
Fast action actuator
Low pressure drop and low operating pressure required
Vertical and horizontal installation
On site flow adjustment available -
Chilled Beams, Terminal Units, Ventilation
Trox Passive Beam
Type TPB
Available in nominal lengths of up to 10 ft with a horizontal 2-pipe heat exchanger
It can be installed either freely suspended or above the ceiling gridType PKV
Passive chilled beam with 2-pipe heat exchanger for ceiling installation, either freely suspended or above an open cell ceiling -
Airflow Control, Terminal Units, Ventilation
Trox VAV Terminal Units
Type LVC
Circular VAV terminal units for supply air and extract air systems with variable volume flows, low airflow velocities and low duct pressuresType TVR
Circular VAV terminal units for standard applications regarding the supply air or extract air control in variable air volume systems -
Airflow Control, Terminal Units, Ventilation
Trox Volume Flow Controllers
Type VFL
Circular, mechanical self-powered controllers for insertion into ducting, for the quick and easy balancing of constant volume flow rates in ventilation and air conditioning systemsType RN
Circular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systemsType EN
Rectangular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systemsType AK
Circular shut-off dampers for shutting off volume flows in ventilation ducts of air conditioning systemsType VFC
Circular mechanical self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems with low airflow velocities
-
Coils, Terminal Units, Ventilation
HeatCraft Condenser, Evaporator, MicroChannel, Steam and Hydronic Coils
Coils for commercial and industrial use. Custom fabrication, Modu-Coil and rush delivery available.
Condenser Coils
Energy Recovery Systems
Evaporator Coils
MicroChannel Coils
Steam Coils
Water/Fluid Coils -
PTAC and PTHP, Terminal Units, Ventilation
Islandaire
PTAC’S & PTHP for new construction and replacement projects. Islandaire produces a full replacement line for several models made by Singer, Amana, GE, Friedrich, Slant Fin, Ice Cap, Ice Air, and much more!
7,000 – 15,000 BTU
Electric Heat and Heat pump
Custom sizes
All accessories available -
Terminal Units, Unit Heaters, Ventilation
Rinnai Residential Hot air Generator
Available from our authorized wholesalers
Direct vent wall heating to heat an entire residence or to complete an existing heating system
Unique modulation technology optimizes energy efficiency and responds to the slightest change in temperature
Capacity ranging from 3,000 BTUs to 36,500 BTUs depending on the model
CSA certified
Direct evacuation wall simple to install and discreet
Very low sound levels and simple and intuitive control
Designed for connection to natural gas or propane gas -
Terminal Units, Unit Heaters, Ventilation
Sterling Gas-Fired
Nexus Series
Performance effciencies of 96%
Single-stage, two-stage or full modulation firing rate across 2 sizes
Natural gas and LP gas for application flexibilityGG Series
Low-profile
Garage unit
Residential and commercial outbuilding certified (non-occupied spaces only) in seven configurations to suit every areaTF and TC Series
Tubular heat exchanger technologies
“In-shot” burner system for superior durability, reliability and performance
Available in both propeller (TF) and blower (TC) configurations
10-year heat exchanger warranty.Shield GF Series
Use in moisture-corrosive environments
Corrosion-resistant stainless steel exchanger and cabinet.SF and SC Series
Using a separate combustion process
Range of sizes in both propeller (SF) and blower (SC) configurations
Built to perform and protect in particle-corrosive environments amid excess dust, dirt and humidity -
Terminal Units, Unit Heaters, Ventilation
Sterling Hot Water or Steam
HS Series
Copper coils with aluminum fins and totally enclosed motors in both serpentine (for low clearance areas) and header types for central boiler system applications.VS Series
Designed for installations that require down flow air delivery
Available in 15 sizes including low output (increased airflow) for high-ceiling applications -
Chilled Beams, Terminal Units, Ventilation
Trox Active Chilled Beam
DID620 series beams are a low profile beam designed to allow integration into standard 24 inch wide ceiling grids.
DID600 series beams are also designed to allow their integration into standard 24 inch wide acoustical ceiling grids.
DID604 series beams are designed for four-way discharge patterns which may be suitable for location certain room sizes.
DID300 series beams have a nominal face width of 12 inches and utilize two vertical chilled water coils.
DID-E series beams are designed for high sidewall mounting in hotels and other domiciliary applications.
BID series beams condition perimeter areas in UFAD applications. Conditioned air is delivered by a dedicated perimeter area air handling unit.
QLCI series beams are integrated into low sidewall mounted cabinets and to discharge conditioned air to the space in a displacement fashion. -
Airflow Control, Terminal Units, Ventilation
Trox EASYLAB and LABCONTROL
Precise air flow control for lab and healtcare application
Pressure independant damper style valve
Precise integrated room airflow and pressurization control
Selective diversity control
Simple commissioning and maintenance
Entire Stainless steel and entire plastic construction available
Integrated supply air VAV box and silencer available
Precise damper position”750 MBTU to 4000 MBTU
Fast action actuator
Low pressure drop and low operating pressure required
Vertical and horizontal installation
On site flow adjustment available -
Chilled Beams, Terminal Units, Ventilation
Trox Passive Beam
Type TPB
Available in nominal lengths of up to 10 ft with a horizontal 2-pipe heat exchanger
It can be installed either freely suspended or above the ceiling gridType PKV
Passive chilled beam with 2-pipe heat exchanger for ceiling installation, either freely suspended or above an open cell ceiling -
Airflow Control, Terminal Units, Ventilation
Trox VAV Terminal Units
Type LVC
Circular VAV terminal units for supply air and extract air systems with variable volume flows, low airflow velocities and low duct pressuresType TVR
Circular VAV terminal units for standard applications regarding the supply air or extract air control in variable air volume systems -
Airflow Control, Terminal Units, Ventilation
Trox Volume Flow Controllers
Type VFL
Circular, mechanical self-powered controllers for insertion into ducting, for the quick and easy balancing of constant volume flow rates in ventilation and air conditioning systemsType RN
Circular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systemsType EN
Rectangular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systemsType AK
Circular shut-off dampers for shutting off volume flows in ventilation ducts of air conditioning systemsType VFC
Circular mechanical self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems with low airflow velocities