Air Handling Units
Showing all 12 results
-
Air Handling Units, Modular Air Handling Units, Ventilation
Bosch Air Handling Units – AH Series
Modular construction units from 800 to 38,000 CFM
Concealed Skeleton Design – all framework is inside the unit, unexposed to ambient air and secured against thermal-bridging and condensation
Two inch rigid closed-cell polyurethane foam insulation
Direct drive plenum fansSKU: n/a -
Air Handling Units, Air Source Heat Pumps, Custom Air Handling Units, Heat Pumps, Modular Heat Pumps, Ventilation
ClimateCraft Custom Air Handling Units
Custom air handler manufacturer (2000 to 200,000CFM+)
Insulation choices are 2’’, 3’’ and 4’’ (fiberglass or injected foam)
Access TM (Replacement solutions) Factory made and field assembled
Innovative removable panel design
Full thermal break construction
Exclusive roll-formed panels
Factory provided unit inlet, outlet and radiated sound levels
Progressive FanMatrix™ fan array capability provides improved energy and sound performance, reduced space demands, increased reliability and lower long term cost of ownership without sacrificing vibration control and seismic qualification. (5 year warranty)
IBC certification and OSHPD pre-approval are available for seismic requirements
SKU: n/a -
Air Handling Units, Modular Air Handling Units, Ventilation
Dunham-Bush CS3
AHRI certified & ETL listed
Air volume from 1000 to 56000cfm
Small footprint
Flexible modular design
Available with horizontal & vertical orientation
TEFC NEMA motors
Optional factory installed variable frequency drives
Optional heating and cooling coils (water, DX & steam)
Optional filtration (disposable, bag, HEPA)
Energy recovery options available (wheel, heat pipe, plate heat exchanger)SKU: n/a -
Air Handling Units, Custom Air Handling Units, Ventilation
Ecotron Custom Packaged Refrigeration Air Handling Unit
Custom Air Handling Units (range from 500 to 500 000 cfm)
1” , 2” panel to panel construction with standard R-7 per inch polyurethane
foam insulation (airstreams up to 160°F)
1” , 2” , 3” , 4” panel to panel construction with fiberglass insulation
Full-thermal-break
Eco-Array™ – multiple electronically commutated (ECM) fan array
Integral gas phase media air filtration
Combination scroll-digital scroll systems for capacity control and head pressure control
Micro-channel outdoor condenser coils that reduce refrigerant charge of units
Ultra-violet lights
Single, dual or triple point power connections
All major voltages
Integral 120 V circuits for lights and receptacles
Humidification manifolds with steam generators
Baked-on powder coat exterior and interior finishes
Corrosion protection(s), sea coast protection and anti-microbial finishes
Custom acoustical liners for sound reduction and sound sensitive applications
Galvanized G-90 steel, aluminum or stainless steel exterior and interior panel construction
Modular/split construction for retrofit or dimensionally restrictive installations
Flat panel, checker plate or anti-slip coating for floor liners
Eco-Logic™ coil-compressor balancing provided on all DX systemsSKU: n/a -
Air Handling Units, Custom Air Handling Units, Ventilation
Haakon Custom Air Handling Units
Split and plenum for installing a unit around a column
Vertical units
Kit units delivered in pieces with site supervision
L shaped units
Double decker units
Units with sections of varying height
Access into every section
Access room for easy filter removal
Slide-out filters where access is limited
Room for access to both sides of the fan
Easy bearing access
Extended lubrication lines
Fans and Coils selected for optimum efficiency
Ultra low leakage casing with factory leak testsSKU: n/a -
Air Handling Units, Modular Air Handling Units, Ventilation
Klimor EVO Air Handling Units
Modular construction units up to 20 000 cfm indoor or outdoor installation
Supporting framework structure based on internal system of aluminum or steel frame
Magnesium sheet outside panels
Sandwich type pannels with thermal break solution
Polyurethane foam insulationSKU: n/a -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RG Series
Dual Core High Efficiency Heat Recovery Unit
750 to 96 000 CFM
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Indoor and outdoor construction
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of multi section low leakage dampers (4) with actuators
Electric actuators by default, pneumatic on sizes RG 33000 and largerSKU: n/a -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGN Dedicated Path Series
Dual Core High Efficiency Heat Recovery Unit
2000 to 42 000 CFM
Indoor units with exhaust and supply air ducts on the same end
Unique design keeping outside air intake and exhaust air seperate
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuatorsSKU: n/a -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGN Series
Dual Core High Efficiency Heat Recovery Unit
2000 to 42 000 CFM
Indoor units with exhaust and supply air ducts on the same end
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuatorsSKU: n/a -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGSP Series
Dual Core High Efficiency Heat Recovery Unit
110 to 2000 CFM
Indoor units for smaller capacity
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuatorsSKU: n/a -
Air Handling Units, Modular Air Handling Units, Ventilation
Trox Air Handling Units
Modular construction from 700 to 55 000 cfm with very low leackage rate
Flexible frame construction, completely covered externally by thermally insulated panels or doors
Easy installation, maintenance and cleaning
Injected foam or fiberglass insulation
Painted panelsSKU: n/a -
Air Handling Units, Heat Recovery Systems, Ventilation
Zehnder Residential ERV/HRV Systems
Airflow up to 325 cfm
Complete heat exchanger and energy solution with all accessories and controls
The only Passive Houses certified heat and energy exchanger manufacturer in North America
Provides and extracts air where required in the residence
Very quiet, easy installation and maintenanceSKU: n/a
-
Air Handling Units, Modular Air Handling Units, Ventilation
Bosch Air Handling Units – AH Series
Modular construction units from 800 to 38,000 CFM
Concealed Skeleton Design – all framework is inside the unit, unexposed to ambient air and secured against thermal-bridging and condensation
Two inch rigid closed-cell polyurethane foam insulation
Direct drive plenum fans -
Air Handling Units, Air Source Heat Pumps, Custom Air Handling Units, Heat Pumps, Modular Heat Pumps, Ventilation
ClimateCraft Custom Air Handling Units
Custom air handler manufacturer (2000 to 200,000CFM+)
Insulation choices are 2’’, 3’’ and 4’’ (fiberglass or injected foam)
Access TM (Replacement solutions) Factory made and field assembled
Innovative removable panel design
Full thermal break construction
Exclusive roll-formed panels
Factory provided unit inlet, outlet and radiated sound levels
Progressive FanMatrix™ fan array capability provides improved energy and sound performance, reduced space demands, increased reliability and lower long term cost of ownership without sacrificing vibration control and seismic qualification. (5 year warranty)
IBC certification and OSHPD pre-approval are available for seismic requirements
-
Air Handling Units, Modular Air Handling Units, Ventilation
Dunham-Bush CS3
AHRI certified & ETL listed
Air volume from 1000 to 56000cfm
Small footprint
Flexible modular design
Available with horizontal & vertical orientation
TEFC NEMA motors
Optional factory installed variable frequency drives
Optional heating and cooling coils (water, DX & steam)
Optional filtration (disposable, bag, HEPA)
Energy recovery options available (wheel, heat pipe, plate heat exchanger) -
Air Handling Units, Custom Air Handling Units, Ventilation
Ecotron Custom Packaged Refrigeration Air Handling Unit
Custom Air Handling Units (range from 500 to 500 000 cfm)
1” , 2” panel to panel construction with standard R-7 per inch polyurethane
foam insulation (airstreams up to 160°F)
1” , 2” , 3” , 4” panel to panel construction with fiberglass insulation
Full-thermal-break
Eco-Array™ – multiple electronically commutated (ECM) fan array
Integral gas phase media air filtration
Combination scroll-digital scroll systems for capacity control and head pressure control
Micro-channel outdoor condenser coils that reduce refrigerant charge of units
Ultra-violet lights
Single, dual or triple point power connections
All major voltages
Integral 120 V circuits for lights and receptacles
Humidification manifolds with steam generators
Baked-on powder coat exterior and interior finishes
Corrosion protection(s), sea coast protection and anti-microbial finishes
Custom acoustical liners for sound reduction and sound sensitive applications
Galvanized G-90 steel, aluminum or stainless steel exterior and interior panel construction
Modular/split construction for retrofit or dimensionally restrictive installations
Flat panel, checker plate or anti-slip coating for floor liners
Eco-Logic™ coil-compressor balancing provided on all DX systems -
Air Handling Units, Custom Air Handling Units, Ventilation
Haakon Custom Air Handling Units
Split and plenum for installing a unit around a column
Vertical units
Kit units delivered in pieces with site supervision
L shaped units
Double decker units
Units with sections of varying height
Access into every section
Access room for easy filter removal
Slide-out filters where access is limited
Room for access to both sides of the fan
Easy bearing access
Extended lubrication lines
Fans and Coils selected for optimum efficiency
Ultra low leakage casing with factory leak tests -
Air Handling Units, Modular Air Handling Units, Ventilation
Klimor EVO Air Handling Units
Modular construction units up to 20 000 cfm indoor or outdoor installation
Supporting framework structure based on internal system of aluminum or steel frame
Magnesium sheet outside panels
Sandwich type pannels with thermal break solution
Polyurethane foam insulation -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RG Series
Dual Core High Efficiency Heat Recovery Unit
750 to 96 000 CFM
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Indoor and outdoor construction
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of multi section low leakage dampers (4) with actuators
Electric actuators by default, pneumatic on sizes RG 33000 and larger -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGN Dedicated Path Series
Dual Core High Efficiency Heat Recovery Unit
2000 to 42 000 CFM
Indoor units with exhaust and supply air ducts on the same end
Unique design keeping outside air intake and exhaust air seperate
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuators -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGN Series
Dual Core High Efficiency Heat Recovery Unit
2000 to 42 000 CFM
Indoor units with exhaust and supply air ducts on the same end
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuators -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGSP Series
Dual Core High Efficiency Heat Recovery Unit
110 to 2000 CFM
Indoor units for smaller capacity
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuators -
Air Handling Units, Modular Air Handling Units, Ventilation
Trox Air Handling Units
Modular construction from 700 to 55 000 cfm with very low leackage rate
Flexible frame construction, completely covered externally by thermally insulated panels or doors
Easy installation, maintenance and cleaning
Injected foam or fiberglass insulation
Painted panels -
Air Handling Units, Heat Recovery Systems, Ventilation
Zehnder Residential ERV/HRV Systems
Airflow up to 325 cfm
Complete heat exchanger and energy solution with all accessories and controls
The only Passive Houses certified heat and energy exchanger manufacturer in North America
Provides and extracts air where required in the residence
Very quiet, easy installation and maintenance
-
Air Handling Units, Modular Air Handling Units, Ventilation
Bosch Air Handling Units – AH Series
Modular construction units from 800 to 38,000 CFM
Concealed Skeleton Design – all framework is inside the unit, unexposed to ambient air and secured against thermal-bridging and condensation
Two inch rigid closed-cell polyurethane foam insulation
Direct drive plenum fans -
Air Handling Units, Air Source Heat Pumps, Custom Air Handling Units, Heat Pumps, Modular Heat Pumps, Ventilation
ClimateCraft Custom Air Handling Units
Custom air handler manufacturer (2000 to 200,000CFM+)
Insulation choices are 2’’, 3’’ and 4’’ (fiberglass or injected foam)
Access TM (Replacement solutions) Factory made and field assembled
Innovative removable panel design
Full thermal break construction
Exclusive roll-formed panels
Factory provided unit inlet, outlet and radiated sound levels
Progressive FanMatrix™ fan array capability provides improved energy and sound performance, reduced space demands, increased reliability and lower long term cost of ownership without sacrificing vibration control and seismic qualification. (5 year warranty)
IBC certification and OSHPD pre-approval are available for seismic requirements
-
Air Handling Units, Modular Air Handling Units, Ventilation
Dunham-Bush CS3
AHRI certified & ETL listed
Air volume from 1000 to 56000cfm
Small footprint
Flexible modular design
Available with horizontal & vertical orientation
TEFC NEMA motors
Optional factory installed variable frequency drives
Optional heating and cooling coils (water, DX & steam)
Optional filtration (disposable, bag, HEPA)
Energy recovery options available (wheel, heat pipe, plate heat exchanger) -
Air Handling Units, Custom Air Handling Units, Ventilation
Ecotron Custom Packaged Refrigeration Air Handling Unit
Custom Air Handling Units (range from 500 to 500 000 cfm)
1” , 2” panel to panel construction with standard R-7 per inch polyurethane
foam insulation (airstreams up to 160°F)
1” , 2” , 3” , 4” panel to panel construction with fiberglass insulation
Full-thermal-break
Eco-Array™ – multiple electronically commutated (ECM) fan array
Integral gas phase media air filtration
Combination scroll-digital scroll systems for capacity control and head pressure control
Micro-channel outdoor condenser coils that reduce refrigerant charge of units
Ultra-violet lights
Single, dual or triple point power connections
All major voltages
Integral 120 V circuits for lights and receptacles
Humidification manifolds with steam generators
Baked-on powder coat exterior and interior finishes
Corrosion protection(s), sea coast protection and anti-microbial finishes
Custom acoustical liners for sound reduction and sound sensitive applications
Galvanized G-90 steel, aluminum or stainless steel exterior and interior panel construction
Modular/split construction for retrofit or dimensionally restrictive installations
Flat panel, checker plate or anti-slip coating for floor liners
Eco-Logic™ coil-compressor balancing provided on all DX systems -
Air Handling Units, Custom Air Handling Units, Ventilation
Haakon Custom Air Handling Units
Split and plenum for installing a unit around a column
Vertical units
Kit units delivered in pieces with site supervision
L shaped units
Double decker units
Units with sections of varying height
Access into every section
Access room for easy filter removal
Slide-out filters where access is limited
Room for access to both sides of the fan
Easy bearing access
Extended lubrication lines
Fans and Coils selected for optimum efficiency
Ultra low leakage casing with factory leak tests -
Air Handling Units, Modular Air Handling Units, Ventilation
Klimor EVO Air Handling Units
Modular construction units up to 20 000 cfm indoor or outdoor installation
Supporting framework structure based on internal system of aluminum or steel frame
Magnesium sheet outside panels
Sandwich type pannels with thermal break solution
Polyurethane foam insulation -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RG Series
Dual Core High Efficiency Heat Recovery Unit
750 to 96 000 CFM
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Indoor and outdoor construction
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of multi section low leakage dampers (4) with actuators
Electric actuators by default, pneumatic on sizes RG 33000 and larger -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGN Dedicated Path Series
Dual Core High Efficiency Heat Recovery Unit
2000 to 42 000 CFM
Indoor units with exhaust and supply air ducts on the same end
Unique design keeping outside air intake and exhaust air seperate
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuators -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGN Series
Dual Core High Efficiency Heat Recovery Unit
2000 to 42 000 CFM
Indoor units with exhaust and supply air ducts on the same end
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuators -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGSP Series
Dual Core High Efficiency Heat Recovery Unit
110 to 2000 CFM
Indoor units for smaller capacity
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuators -
Air Handling Units, Modular Air Handling Units, Ventilation
Trox Air Handling Units
Modular construction from 700 to 55 000 cfm with very low leackage rate
Flexible frame construction, completely covered externally by thermally insulated panels or doors
Easy installation, maintenance and cleaning
Injected foam or fiberglass insulation
Painted panels -
Air Handling Units, Heat Recovery Systems, Ventilation
Zehnder Residential ERV/HRV Systems
Airflow up to 325 cfm
Complete heat exchanger and energy solution with all accessories and controls
The only Passive Houses certified heat and energy exchanger manufacturer in North America
Provides and extracts air where required in the residence
Very quiet, easy installation and maintenance