Ventilation
Showing 1–15 of 17 results
-
Packaged Cooling/Heating Rooftop Units, Packaged Rooftops, Ventilation
Addison LC Series
2″ double wall construction
R-13 closed cell foam insulation with thermal break
Hinged access doors and easy access to all components
BI plenum supply fan with integral variable speed control and air flow measurement
Integrated control platform with BMS communication
Variable speed EC condenser fans with sickle blade and acoustical design
Individual electronic expansion valves (EXC) for each coil segment allows for control of refrigerant while maintaining leaving air temperature
Active Coil Exposure (TM) with laser positioning system
Brushless permanent magnet variable speed scroll compressor
Variable frequency drive (VFD) for precise modulating controlSKU: n/a -
Packaged Cooling/Heating Rooftop Units, Packaged Rooftops, Ventilation
Addison PR Series
Multiple cabinet sizes help to optimize performance of operating components
Double wall construction of 2” thick, R-13 closed cell foam insulation to reduce heat transfer losses
Stainless steel and/or MAGNI® 555-coated hardware to help prevent fastener corrosion
Powder-coated condenser fan guards to help ensure longterm durability
Fully-insulated coaxial coils on water-source heat pump units to minimize condensation build-up
High-efficiency scroll compressors with crankcase heaters to reduce oil dilution on start-up
Variable head pressure control to help ensure proper unit operation at low ambient conditions
Optional digital scroll compressor
Optional energy recovery moduleSKU: n/a -
Split Systems, Ventilation
Addison VC/HC Series
Painted cabinet
Removable access panels
1″ closed cellular foam insulation with galvanized sheet metal liner
Minimum 4-row DX coils
Optional 6-row coils
Adjustable motor mount
2 inch filter racks
Mounting holes for horizontal units; threaded for smaller units, extended base rails on larger units
Field-mounted motor starters with optional phase and voltage monitorsSKU: n/a -
Air Handling Units, Modular Air Handling Units, Ventilation
Bosch Air Handling Units – AH Series
Modular construction units from 800 to 38,000 CFM
Concealed Skeleton Design – all framework is inside the unit, unexposed to ambient air and secured against thermal-bridging and condensation
Two inch rigid closed-cell polyurethane foam insulation
Direct drive plenum fansSKU: n/a -
-
Air Handling Units, Air Source Heat Pumps, Custom Air Handling Units, Heat Pumps, Modular Heat Pumps, Ventilation
ClimateCraft Custom Air Handling Units
Air Handling Units, Air Source Heat Pumps, Custom Air Handling Units, Heat Pumps, Modular Heat Pumps, VentilationClimateCraft Custom Air Handling Units
Custom air handler manufacturer (2000 to 200,000CFM+)
Insulation choices are 2’’, 3’’ and 4’’ (fiberglass or injected foam)
Access TM (Replacement solutions) Factory made and field assembled
Innovative removable panel design
Full thermal break construction
Exclusive roll-formed panels
Factory provided unit inlet, outlet and radiated sound levels
Progressive FanMatrix™ fan array capability provides improved energy and sound performance, reduced space demands, increased reliability and lower long term cost of ownership without sacrificing vibration control and seismic qualification. (5 year warranty)
IBC certification and OSHPD pre-approval are available for seismic requirements
SKU: n/a -
Air Handling Units, Modular Air Handling Units, Ventilation
Dunham-Bush CS3
AHRI certified & ETL listed
Air volume from 1000 to 56000cfm
Small footprint
Flexible modular design
Available with horizontal & vertical orientation
TEFC NEMA motors
Optional factory installed variable frequency drives
Optional heating and cooling coils (water, DX & steam)
Optional filtration (disposable, bag, HEPA)
Energy recovery options available (wheel, heat pipe, plate heat exchanger)SKU: n/a -
Air Handling Units, Custom Air Handling Units, Ventilation
Ecotron Custom Packaged Refrigeration Air Handling Unit
Air Handling Units, Custom Air Handling Units, VentilationEcotron Custom Packaged Refrigeration Air Handling Unit
Custom Air Handling Units (range from 500 to 500 000 cfm)
1” , 2” panel to panel construction with standard R-7 per inch polyurethane
foam insulation (airstreams up to 160°F)
1” , 2” , 3” , 4” panel to panel construction with fiberglass insulation
Full-thermal-break
Eco-Array™ – multiple electronically commutated (ECM) fan array
Integral gas phase media air filtration
Combination scroll-digital scroll systems for capacity control and head pressure control
Micro-channel outdoor condenser coils that reduce refrigerant charge of units
Ultra-violet lights
Single, dual or triple point power connections
All major voltages
Integral 120 V circuits for lights and receptacles
Humidification manifolds with steam generators
Baked-on powder coat exterior and interior finishes
Corrosion protection(s), sea coast protection and anti-microbial finishes
Custom acoustical liners for sound reduction and sound sensitive applications
Galvanized G-90 steel, aluminum or stainless steel exterior and interior panel construction
Modular/split construction for retrofit or dimensionally restrictive installations
Flat panel, checker plate or anti-slip coating for floor liners
Eco-Logic™ coil-compressor balancing provided on all DX systemsSKU: n/a -
Air Handling Units, Custom Air Handling Units, Ventilation
Haakon Custom Air Handling Units
Split and plenum for installing a unit around a column
Vertical units
Kit units delivered in pieces with site supervision
L shaped units
Double decker units
Units with sections of varying height
Access into every section
Access room for easy filter removal
Slide-out filters where access is limited
Room for access to both sides of the fan
Easy bearing access
Extended lubrication lines
Fans and Coils selected for optimum efficiency
Ultra low leakage casing with factory leak testsSKU: n/a -
Coils, Terminal Units, Ventilation
HeatCraft Condenser, Evaporator, MicroChannel, Steam and Hydronic Coils
Coils, Terminal Units, VentilationHeatCraft Condenser, Evaporator, MicroChannel, Steam and Hydronic Coils
Coils for commercial and industrial use. Custom fabrication, Modu-Coil and rush delivery available.
Condenser Coils
Energy Recovery Systems
Evaporator Coils
MicroChannel Coils
Steam Coils
Water/Fluid CoilsSKU: n/a -
PTAC and PTHP, Terminal Units, Ventilation
Islandaire
PTAC’S & PTHP for new construction and replacement projects. Islandaire produces a full replacement line for several models made by Singer, Amana, GE, Friedrich, Slant Fin, Ice Cap, Ice Air, and much more!
7,000 – 15,000 BTU
Electric Heat and Heat pump
Custom sizes
All accessories availableSKU: n/a -
Air Handling Units, Modular Air Handling Units, Ventilation
Klimor EVO Air Handling Units
Modular construction units up to 20 000 cfm indoor or outdoor installation
Supporting framework structure based on internal system of aluminum or steel frame
Magnesium sheet outside panels
Sandwich type pannels with thermal break solution
Polyurethane foam insulationSKU: n/a -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RG Series
Dual Core High Efficiency Heat Recovery Unit
750 to 96 000 CFM
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Indoor and outdoor construction
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of multi section low leakage dampers (4) with actuators
Electric actuators by default, pneumatic on sizes RG 33000 and largerSKU: n/a -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGN Dedicated Path Series
Dual Core High Efficiency Heat Recovery Unit
2000 to 42 000 CFM
Indoor units with exhaust and supply air ducts on the same end
Unique design keeping outside air intake and exhaust air seperate
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuatorsSKU: n/a -
Air Handling Units, Heat Recovery Systems, Ventilation
Tempeff RGN Series
Dual Core High Efficiency Heat Recovery Unit
2000 to 42 000 CFM
Indoor units with exhaust and supply air ducts on the same end
Recovery efficiency rate upto to 90% in winter and 80% in summer (+-5%)
Construction in galvanized steel G90 with foam injected insulation
Cooling and heating coils available for water, refrigerant and steam
Recirculation and free cooling
Internal shut off dampers
No requirements for defrost strategy
Switchover damper section comprised of low leakage dampers with electric actuatorsSKU: n/a
