Cooling Towers and Heat Rejection
Showing 1–15 of 26 results
-
Condensing Units, Cooling, Cooling Towers and Heat Rejection
Addison RC Series
Painted weather resistant cabinet
Hinged control panel cover
24 volt control transformer
Phase and voltage monitors
Compressor and condenser fan motor starters
Totally enclosed air over (IP54) condenser fan motors
Terminal strip for temperature control wiring
Vinyl-coated condenser coil guards
Formed steel base rails for support and structural rigiditySKU: n/a -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil CAC
Air-cooled condenser
Inline models
1 to 8 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL isted and CSA approvedSKU: n/a -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Duplex
Air-cooled condenser
Duplex models
1 to 12 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL isted and CSA approvedSKU: n/a -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Industrial Duty Air Cooled Condenser
Air-Cooled Condensers, Cooling, Cooling Towers and Heat RejectionCancoil DAC Industrial Duty Air Cooled Condenser
100 Ton Remote Air Cooled Condenser
Custom designed for refrigeration application in a severe mining environment
Dual refrigeration circuits
Copper fin, copper tube condenser coils with Heresite corrosion protection
Factory mounted and piped head pressure controls
Heated and insulated receiver with full stainless steel enclosure
Stainless steel cabinet, fasteners, hardware
NEMA 4X control box,
Windowed fused disconnect switch
Structural steel welded frame with baked enamel coating for severe environment
Chemical duty fan motors
Welded stainless steel fansSKU: n/a -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Inline
Air-cooled condenser
Duplex models
1 to 12 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL listed and CSA approvedSKU: n/a -
Cooling, Cooling Towers and Heat Rejection, Dry Coolers (Closed System)
Cancoil Flat Coil Fluid Cooler
Cooling, Cooling Towers and Heat Rejection, Dry Coolers (Closed System)Cancoil Flat Coil Fluid Cooler
Air-Cooled fluid cooler
Inline or duplex models
1 to 12 fans
Galvanized cabinet standard, aluminum and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continous plate type aluminum fin/copper tube coils (coated fins available)
MPT connections standard; Flange and ODS connections available
Coils are 100% leak tested at 450 psig minimum
TEFC motors stadard
Complete fan cycling packages available
ECM motors available
Standard units are UL listed and CSA approvedSKU: n/a -
Cooling, Cooling Towers and Heat Rejection, Dry Coolers (Closed System)
Cancoil V-Bank Fluid Cooler
Custom air-cooled fluid cooler
V-banks coils
Inline or duplex models
Galvanized cabinet standard, aluminum and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continous plate type aluminum fin/copper tube coils (coated fins available)
MPT connections standard; Flange and ODS connections available
Coils are 100% leak tested at 450 psig minimum
TEFC motors stadard
Complete fan cycling packages available
ECM motors available
SKU: n/a -
Adiabatic Fluid Cooler, Cooling, Cooling Towers and Heat Rejection
Nimbus Adiabatic Fluid Cooler
· Hybrid adiabatic fluid coolers
· Capacity range from 7.5 to 210 tons
· Misting nozzle technology
· Poly-coated coils with copper tubing and stainless steel construction
· Available in 575V without the use of a transformerSKU: n/a -
Cooling, Cooling Towers (Open System), Cooling Towers and Heat Rejection
SPX Marley Aquatower
8 to 126 tons per cell
Induced flow and crossflow
CTI Certified
Galvanised steel, stainless steel or fiberglass construction
Integral louvers for zero water splashout and superior Winter operation
Available with a one year mechanical warrantySKU: n/a -
Cooling, Cooling Towers (Open System), Cooling Towers and Heat Rejection
SPX Marley AV
125 to 772 tons per cell
Induced flow and crossflow
CTI Certified
Galvanised steel or stainless steel construction
Integral louvers for zero water splashout and superior Winter operation
Available with a five year mechanical warrantySKU: n/a -
Cooling, Cooling Towers and Heat Rejection, Evaporative Fluid Cooler (Closed System)
SPX Marley DT
45 to 265 tons per cell
Induced flow and counter flow
CTI Certified
Low sound fans standard on all models
Galvanised steel construction with stainless steel component options
HDG steel or stainless steel coil material
Triple pass inlet louvers and drift eliminators to conserve water
Available with a five year mechanical warrantySKU: n/a -
Cooling, Cooling Towers and Heat Rejection, Evaporative Fluid Cooler (Closed System)
SPX Marley LW
18 to 107 tons per cell
Induced flow and counter flow
CTI Certified
Quiet ECM fans with integral VSD on all models
Copper coil standard
Low-clog spray system
Triple pass drift eliminators
Available with a five year mechanical warrantySKU: n/a -
Cooling, Cooling Towers and Heat Rejection, Evaporative Fluid Cooler (Closed System)
SPX Marley MC
Forced draft counterflow fluid cooler
Galvanized steel with optional stainless steel construction
Reliable and performant for high-end applications with low noise and space saving footprint
Suitable for all critical indoor and outdoor applications
Combines the function of a cooling tower and heat exchanger into one system
Electric basin heaters
Fluid cooler coil may carry glycol solutions to protect against freezing or hold an increased flowrate
Indoor storage tank
Combination of PVC piping and polypropylene nozzles which are very resistant to build-upsSKU: n/a -
Cooling, Cooling Towers (Open System), Cooling Towers and Heat Rejection
SPX Marley MCW
18 to 600 tons per cell
Forced flow and counter flow
CTI Certified
Galvanised steel or stainless steel construction
Easy removal of fill (heat transfer media)
Available with a five year mechanical warrantySKU: n/a -
Cooling, Cooling Towers (Open System), Cooling Towers and Heat Rejection
SPX Marley MD
89 to 756 tons per cell
Induced flow and counter flow
CTI Certified
Galvanised steel or stainless steel construction
Triple pass inlet louvers and drift eliminators to conserve water and improve winter operation
Available with a five year mechanical warrantySKU: n/a