Cooling
Showing 1–15 of 48 results
-
Condensing Units, Cooling, Cooling Towers and Heat Rejection
Addison RC Series
Painted weather resistant cabinet
Hinged control panel cover
24 volt control transformer
Phase and voltage monitors
Compressor and condenser fan motor starters
Totally enclosed air over (IP54) condenser fan motors
Terminal strip for temperature control wiring
Vinyl-coated condenser coil guards
Formed steel base rails for support and structural rigiditySKU: n/a -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil CAC
Air-cooled condenser
Inline models
1 to 8 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL isted and CSA approvedSKU: n/a -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Duplex
Air-cooled condenser
Duplex models
1 to 12 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL isted and CSA approvedSKU: n/a -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Industrial Duty Air Cooled Condenser
100 Ton Remote Air Cooled Condenser
Custom designed for refrigeration application in a severe mining environment
Dual refrigeration circuits
Copper fin, copper tube condenser coils with Heresite corrosion protection
Factory mounted and piped head pressure controls
Heated and insulated receiver with full stainless steel enclosure
Stainless steel cabinet, fasteners, hardware
NEMA 4X control box,
Windowed fused disconnect switch
Structural steel welded frame with baked enamel coating for severe environment
Chemical duty fan motors
Welded stainless steel fansSKU: n/a -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Inline
Air-cooled condenser
Duplex models
1 to 12 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL listed and CSA approvedSKU: n/a -
Cooling, Cooling Towers and Heat Rejection, Dry Coolers (Closed System)
Cancoil Flat Coil Fluid Cooler
Air-Cooled fluid cooler
Inline or duplex models
1 to 12 fans
Galvanized cabinet standard, aluminum and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continous plate type aluminum fin/copper tube coils (coated fins available)
MPT connections standard; Flange and ODS connections available
Coils are 100% leak tested at 450 psig minimum
TEFC motors stadard
Complete fan cycling packages available
ECM motors available
Standard units are UL listed and CSA approvedSKU: n/a -
Cooling, Cooling Towers and Heat Rejection, Dry Coolers (Closed System)
Cancoil V-Bank Fluid Cooler
Custom air-cooled fluid cooler
V-banks coils
Inline or duplex models
Galvanized cabinet standard, aluminum and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continous plate type aluminum fin/copper tube coils (coated fins available)
MPT connections standard; Flange and ODS connections available
Coils are 100% leak tested at 450 psig minimum
TEFC motors stadard
Complete fan cycling packages available
ECM motors available
SKU: n/a -
Air Source Heat Pumps, Air-Cooled Chillers, Chillers, Modular Chillers, Modular Heat Pumps
ClimaCool Air Source
Air source chiller
15 to 85 tons chiller modules to be combined
Cooling, Heat Recovery, Heat Pump and Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bankSKU: n/a -
Air Source Heat Pumps, Air-Cooled Chillers, Chillers, Cooling, Heat Pumps, Modular Chillers, Modular Heat Pumps
ClimaCool Air Source Simultaneous Cooling and Heating
Modular air source heat pump
15 to 85 tons chiller modules to be combined
Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bankSKU: n/a -
Chillers, Cooling, Heat Pumps, Modular Chillers, Modular Heat Pumps, Water Cooled Chillers, Water to Water Heatpump
ClimaCool Water Source
Water source chiller
15 to 85 tons chiller modules to be combined
Cooling, Heat Recovery, Heat Pump and Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bankSKU: n/a -
Air Source Heat Pumps, Chillers, Cooling, Heat Pumps, Modular Chillers, Modular Heat Pumps, Water Cooled Chillers
ClimaCool Water Source Simultaneous Cooling and Heating
Modular water source heat pump
15 to 85 tons chiller modules to be combined
Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bankSKU: n/a -
Air Handling Units, Air Source Heat Pumps, Custom Air Handling Units, Heat Pumps, Modular Heat Pumps, Ventilation
ClimateCraft Custom Air Handling Units
Custom air handler manufacturer (2000 to 200,000CFM+)
Insulation choices are 2’’, 3’’ and 4’’ (fiberglass or injected foam)
Access TM (Replacement solutions) Factory made and field assembled
Innovative removable panel design
Full thermal break construction
Exclusive roll-formed panels
Factory provided unit inlet, outlet and radiated sound levels
Progressive FanMatrix™ fan array capability provides improved energy and sound performance, reduced space demands, increased reliability and lower long term cost of ownership without sacrificing vibration control and seismic qualification. (5 year warranty)
IBC certification and OSHPD pre-approval are available for seismic requirements
SKU: n/a
-
Condensing Units, Cooling, Cooling Towers and Heat Rejection
Addison RC Series
Painted weather resistant cabinet
Hinged control panel cover
24 volt control transformer
Phase and voltage monitors
Compressor and condenser fan motor starters
Totally enclosed air over (IP54) condenser fan motors
Terminal strip for temperature control wiring
Vinyl-coated condenser coil guards
Formed steel base rails for support and structural rigidity -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil CAC
Air-cooled condenser
Inline models
1 to 8 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL isted and CSA approved -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Duplex
Air-cooled condenser
Duplex models
1 to 12 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL isted and CSA approved -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Industrial Duty Air Cooled Condenser
100 Ton Remote Air Cooled Condenser
Custom designed for refrigeration application in a severe mining environment
Dual refrigeration circuits
Copper fin, copper tube condenser coils with Heresite corrosion protection
Factory mounted and piped head pressure controls
Heated and insulated receiver with full stainless steel enclosure
Stainless steel cabinet, fasteners, hardware
NEMA 4X control box,
Windowed fused disconnect switch
Structural steel welded frame with baked enamel coating for severe environment
Chemical duty fan motors
Welded stainless steel fans -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Inline
Air-cooled condenser
Duplex models
1 to 12 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL listed and CSA approved -
Cooling, Cooling Towers and Heat Rejection, Dry Coolers (Closed System)
Cancoil Flat Coil Fluid Cooler
Air-Cooled fluid cooler
Inline or duplex models
1 to 12 fans
Galvanized cabinet standard, aluminum and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continous plate type aluminum fin/copper tube coils (coated fins available)
MPT connections standard; Flange and ODS connections available
Coils are 100% leak tested at 450 psig minimum
TEFC motors stadard
Complete fan cycling packages available
ECM motors available
Standard units are UL listed and CSA approved -
Cooling, Cooling Towers and Heat Rejection, Dry Coolers (Closed System)
Cancoil V-Bank Fluid Cooler
Custom air-cooled fluid cooler
V-banks coils
Inline or duplex models
Galvanized cabinet standard, aluminum and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continous plate type aluminum fin/copper tube coils (coated fins available)
MPT connections standard; Flange and ODS connections available
Coils are 100% leak tested at 450 psig minimum
TEFC motors stadard
Complete fan cycling packages available
ECM motors available
-
Air Source Heat Pumps, Air-Cooled Chillers, Chillers, Modular Chillers, Modular Heat Pumps
ClimaCool Air Source
Air source chiller
15 to 85 tons chiller modules to be combined
Cooling, Heat Recovery, Heat Pump and Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bank -
Air Source Heat Pumps, Air-Cooled Chillers, Chillers, Cooling, Heat Pumps, Modular Chillers, Modular Heat Pumps
ClimaCool Air Source Simultaneous Cooling and Heating
Modular air source heat pump
15 to 85 tons chiller modules to be combined
Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bank -
Chillers, Cooling, Heat Pumps, Modular Chillers, Modular Heat Pumps, Water Cooled Chillers, Water to Water Heatpump
ClimaCool Water Source
Water source chiller
15 to 85 tons chiller modules to be combined
Cooling, Heat Recovery, Heat Pump and Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bank -
Air Source Heat Pumps, Chillers, Cooling, Heat Pumps, Modular Chillers, Modular Heat Pumps, Water Cooled Chillers
ClimaCool Water Source Simultaneous Cooling and Heating
Modular water source heat pump
15 to 85 tons chiller modules to be combined
Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bank -
Air Handling Units, Air Source Heat Pumps, Custom Air Handling Units, Heat Pumps, Modular Heat Pumps, Ventilation
ClimateCraft Custom Air Handling Units
Custom air handler manufacturer (2000 to 200,000CFM+)
Insulation choices are 2’’, 3’’ and 4’’ (fiberglass or injected foam)
Access TM (Replacement solutions) Factory made and field assembled
Innovative removable panel design
Full thermal break construction
Exclusive roll-formed panels
Factory provided unit inlet, outlet and radiated sound levels
Progressive FanMatrix™ fan array capability provides improved energy and sound performance, reduced space demands, increased reliability and lower long term cost of ownership without sacrificing vibration control and seismic qualification. (5 year warranty)
IBC certification and OSHPD pre-approval are available for seismic requirements
-
Condensing Units, Cooling, Cooling Towers and Heat Rejection
Addison RC Series
Painted weather resistant cabinet
Hinged control panel cover
24 volt control transformer
Phase and voltage monitors
Compressor and condenser fan motor starters
Totally enclosed air over (IP54) condenser fan motors
Terminal strip for temperature control wiring
Vinyl-coated condenser coil guards
Formed steel base rails for support and structural rigidity -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil CAC
Air-cooled condenser
Inline models
1 to 8 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL isted and CSA approved -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Duplex
Air-cooled condenser
Duplex models
1 to 12 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL isted and CSA approved -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Industrial Duty Air Cooled Condenser
100 Ton Remote Air Cooled Condenser
Custom designed for refrigeration application in a severe mining environment
Dual refrigeration circuits
Copper fin, copper tube condenser coils with Heresite corrosion protection
Factory mounted and piped head pressure controls
Heated and insulated receiver with full stainless steel enclosure
Stainless steel cabinet, fasteners, hardware
NEMA 4X control box,
Windowed fused disconnect switch
Structural steel welded frame with baked enamel coating for severe environment
Chemical duty fan motors
Welded stainless steel fans -
Air-Cooled Condensers, Cooling, Cooling Towers and Heat Rejection
Cancoil DAC Inline
Air-cooled condenser
Duplex models
1 to 12 fans
Galvanised cabinet standard, aluminium and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continuous plate type aluminium fin / copper tube (coated fin available)
Coils are 100% leak tested at 450 PSIG minimum
TEFC motors standard
Complete fan cycling and fan speed control packages available
ECM motors available
Standard units are UL listed and CSA approved -
Cooling, Cooling Towers and Heat Rejection, Dry Coolers (Closed System)
Cancoil Flat Coil Fluid Cooler
Air-Cooled fluid cooler
Inline or duplex models
1 to 12 fans
Galvanized cabinet standard, aluminum and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continous plate type aluminum fin/copper tube coils (coated fins available)
MPT connections standard; Flange and ODS connections available
Coils are 100% leak tested at 450 psig minimum
TEFC motors stadard
Complete fan cycling packages available
ECM motors available
Standard units are UL listed and CSA approved -
Cooling, Cooling Towers and Heat Rejection, Dry Coolers (Closed System)
Cancoil V-Bank Fluid Cooler
Custom air-cooled fluid cooler
V-banks coils
Inline or duplex models
Galvanized cabinet standard, aluminum and stainless steel cabinets available
Vertical air discharge standard, horizontal discharge available
Continous plate type aluminum fin/copper tube coils (coated fins available)
MPT connections standard; Flange and ODS connections available
Coils are 100% leak tested at 450 psig minimum
TEFC motors stadard
Complete fan cycling packages available
ECM motors available
-
Air Source Heat Pumps, Air-Cooled Chillers, Chillers, Modular Chillers, Modular Heat Pumps
ClimaCool Air Source
Air source chiller
15 to 85 tons chiller modules to be combined
Cooling, Heat Recovery, Heat Pump and Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bank -
Air Source Heat Pumps, Air-Cooled Chillers, Chillers, Cooling, Heat Pumps, Modular Chillers, Modular Heat Pumps
ClimaCool Air Source Simultaneous Cooling and Heating
Modular air source heat pump
15 to 85 tons chiller modules to be combined
Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bank -
Chillers, Cooling, Heat Pumps, Modular Chillers, Modular Heat Pumps, Water Cooled Chillers, Water to Water Heatpump
ClimaCool Water Source
Water source chiller
15 to 85 tons chiller modules to be combined
Cooling, Heat Recovery, Heat Pump and Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bank -
Air Source Heat Pumps, Chillers, Cooling, Heat Pumps, Modular Chillers, Modular Heat Pumps, Water Cooled Chillers
ClimaCool Water Source Simultaneous Cooling and Heating
Modular water source heat pump
15 to 85 tons chiller modules to be combined
Simultaneous Heating and Cooling.
Modular flexible platform design providing a compact footprint,
True redundancy, ease of service, quiet operation and energy efficiency.
Geothermal central plants, variable flow systems
Ability for future growth/expansion and full load capacity requirements as high as 1,000 tons per bank -
Air Handling Units, Air Source Heat Pumps, Custom Air Handling Units, Heat Pumps, Modular Heat Pumps, Ventilation
ClimateCraft Custom Air Handling Units
Custom air handler manufacturer (2000 to 200,000CFM+)
Insulation choices are 2’’, 3’’ and 4’’ (fiberglass or injected foam)
Access TM (Replacement solutions) Factory made and field assembled
Innovative removable panel design
Full thermal break construction
Exclusive roll-formed panels
Factory provided unit inlet, outlet and radiated sound levels
Progressive FanMatrix™ fan array capability provides improved energy and sound performance, reduced space demands, increased reliability and lower long term cost of ownership without sacrificing vibration control and seismic qualification. (5 year warranty)
IBC certification and OSHPD pre-approval are available for seismic requirements